Table of Contents
Chapter 16 – Surface Areas and Volumes Exercise Ex. 16.1
Question 1
Solution 1
Question 2
Solution 2
Question 3
Solution 3
Question 4
2.2 cubic dm of brass is to be drawn into a cylindrical wire 0.25 cm in diameter. Find the length of the wire.Solution 4
Question 5
Solution 5
Question 6
Solution 6
Question 7
Solution 7
Question 8
Solution 8
Question 9
Find the number of metallic circular discs with 1.5 cm base diameter and of height 0.2 cm to be melted to form a right circular cylinder of height 10 cm and diameter 4.5 cm.Solution 9
Question 10
How many spherical lead shots each of diameter 4.2 cm can be obtained from a solid rectangular lead piece with dimensions 66 cm × 42 cm × 21 cm.Solution 10
Question 11
How many spherical lead shots of diameter 4 cm can be made out of a solid cube of lead whose edge measures 44 cm.Solution 11
Question 12
Three cubes of a metal whose edges are in the ratio 3 : 4: 5 are melted and converted into a single cube whose diagonal is cm. Find the number of cones so formed.Solution 12
Question 13
A solid metallic sphere of radius 10.5 cm is melted and recast into a number of smaller cones, each of radius 3.5 cm and height 3 cm. Find the number of cones so formed.Solution 13
Question 14
Solution 14
Question 15
An iron spherical ball has been melted and recast into smaller balls of equal size. If the radius of each of the smaller balls is 1/4 of the radius of the original ball, how many such balls are made? Compare the surface area, of all the smaller balls combined together with that of the original ball.Solution 15
Question 16
Solution 16
Question 17
A copper rod of diameter 1 cm and length 8 cm is drawn into a wire of length 18 m of uniform thickness. Find the thickness of the wire.Solution 17
Question 18
Solution 18
Question 19
How many coins 1.75 cm in diameter and 2 mm thick must be melted to form a cuboid 11 cm 10 cm 7 cm?Solution 19
Question 20
Solution 20
Question 21
A cylindrical bucket, 32 cm high and with a radius of base 18 cm, is filled with sand. This bucket is emptied out on the ground and a conical heap of sand is formed. If the height of conical heap is 24 cm, find the radius and slant height of the heap.Solution 21
Question 22
A solid metallic sphere of radius 5.6 cm is melted and solid cones each of radius 2.8 cm and height 3.2 cm are made. Find the number of such cones formed.Solution 22
Question 23
A solid cuboid of iron with dimensions 53 cm x 40 cm x 15 cm is melted and recast into a cylindrical pipe. The outer and inner diameters of pipe are 8 cm and 7 cm respectively. Find the length of pipe.Solution 23
Question 24
Solution 24
Question 25
Solution 25
Question 26
Solution 26
Question 27
A spherical ball of radius 3 cm is melted and recast into three spherical balls. The radii of two of the balls are 1.5 cm and 2 cm. Find the diameter of the third ball.Solution 27
Question 28
Solution 28
Question 29
Solution 29
Question 30
Solution 30
Question 31
Solution 31
Question 32
Solution 32
Question 33
Solution 33
Question 34
Solution 34
Question 35
Rain water, which falls on a flat rectangular surface of length 6 m and breadth 4 m is transferred into a cylindrical vessel of internal radius 20 cm. What will be the height of water in the cylindrical vessel if a rainfall of 1 cm has fallen? [Use = 22/7]Solution 35
Question 36
The rain water from a roof of dimensions 22 m × 20 m drains into a cylindrical vessel having diameter of base 2 m and height 3.5 m. if the rain water collected from the roof just fills the cylindrical vessel, then find the rain fall in cm.Solution 36
Question 37
Solution 37
Question 38
Solution 38
Question 39
Solution 39
Question 40
Solution 40
Question 41
Solution 41
Question 42
Solution 42
Question 43
Solution 43
Question 44
Solution 44
Question 45
Solution 45
Question 46
150 spherical marbles, each of diameter 1.4 cm are dropped in cylindrical vessel of diameter 7 cm containing some water, which are completely immersed in water. Find the rise in the level of water in the vesselSolution 46
*Answer given in the book is incorrect.Question 47
Sushant has a vessel, of the form of an inverted cone, open at the top, of height 11 cm and radius of top as 2.5 cm and is full of water. Metallic spherical balls each of diameter 0.5 cm are put in the vessel due to which
of the water in the vessel flows out. Find how many balls were put in the vessel. Sushant made the arrangement so that the water that flows out irrigates the flower beds. What value has been shown by shushant ?Solution 47
Question 48
16 glass spheres each of radius 2 cm are picked into a cuboidal box of internal dimensions 16 cm × 8 cm × 8 cm and then the box is filled with water. Find the volume of water filled in the box.Solution 48
Question 49
Water flows through a cylindrical pipe, whose inner radius is 1 cm, at the rate of 80 cm/sec in an empty cylindrical tank, the radius of whose base is 40 cm. What is the rise of water level in tank in half an hour?Solution 49
Question 50
Water in a canal 1.5 m wide and 6 m deep is flowing with a speed of 10 km/hr. How much area will it irrigate in 30 minutes if 8 cm of standing water is desired?Solution 50
Question 51
A farmer runs a pipe of internal diameter 20 cm from the canal into a cylindrical tank in his field which is 10 m in diameter and 2 m deep. If water flows through the pipe at the rate of 3 km/h, in how much time will the tank be filled?Solution 51
Question 52
A cylindrical tank full of water is emptied by a pipe at the rate of 225 liters per minute. How much time will it take to empty half the tank, if the diameter of its base is 3 m and its height is 3.5 m? (π = 22/7)Solution 52
Question 53
Water is flowing at the rate of 2.52 km/h through a cylindrical pipe into a cylindrical tank, the radius of the base is 40 cm. If the increase in the level of water in the tank, in half an hour is 3.15 m, find the internal diameter of the pipe.Solution 53
Question 54
Water flows at the rate of 15 km/h through a pipe of diameter 14 cm into a cuboidal pond which is 50 m long and 44 m wide. In what time will level of water in the pond rise by 21 cm?Solution 54
Question 55
A canal 300 cm wide and 120 cm deep. The water in the canal is flowing with a speed of 20 km/h. How much area will it irrigate in 20 minutes if 8 cm of standing water is desired?Solution 55
Question 56
The sum of the radius of base and height of a solid right circular cylinder is 37 cm. If the total surface area of the solid cylinder is 1628 cm2, find the volume of cylinder.Solution 56
Question 57
Solution 57
Question 58
Solution 58
Question 59
Solution 59
Question 60
A 5 m wide cloth is used to make a conical tent of base diameter 14 m and height 24 m. find the cost of cloth used at the rate of Rs. 25 per metre. (π = 22/7)Solution 60
Question 61
Solution 61
Question 62
The difference between the outer and inner curved surface areas of a hollow right circular cylinder 14 cm long is 88 cm2. If the volume of metal used in making the cylinder is 176 cm3, find the outer and inner diameters of the cylinder. (Use = 22/7)Solution 62
Question 63
Solution 63
Question 64
Solution 64
Question 65
If the total surface area of a solid hemisphere is 462 cm2, find its volume.
(π = 22/7)Solution 65
*Answer given in the book is incorrect.Question 66
Water flows at the rate of 10m/minute through a cylindrical pipe 5 mm in diameter. How long would it take to fill a conical vessel whose diameter at the base is 40 cm and depth 24 cm?Solution 66
Question 67
A solid right circular cone of height 120 cm and radius 60 cm is placed in a right circular cylindrical full of water of height 180 cm such that it touches the bottom. Find the volume of water left in the cylinder, if the radius of the cylinder is equal to the radius of the cone.Solution 67
Question 68
A heap of rice in the form of a cone of diameter 9 m and height 3.5 m. Find the volume of rice. How much canvas cloth is required to cover the heap?Solution 68
Question 69
A cylindrical bucket of height 32 cm and base radius 18 cm is filled with sand. This bucket is emptied on the ground and a conical heap of sand is formed. If the height of the conical heap is 24 cm, find the radius and slant height of the heap.Solution 69
Question 70
A hemispherical bowl of internal radius 9 cm is full of liquid. The liquid is to be filled into cylindrical shaped each of radius 1.5 cm and height 4 cm. How many bottles are needed to empty the bowl?Solution 70
Question 71
A factory manufactures 120,000 pencils daily The pencils are cylindrical in shape each of length 25 cm and circumference of base as 1.5 cm. Determine the cost of colouring the curved surfaces of the pencils manufactured in one day at Rs. 0.05 per dm2.Solution 71
Question 72
πThe part of a conical vessel of internal radius 5 cm and height 24 cm is full of water. The water is emptied into a cylindrical vessel with internal radius 10 cm. Find the height of water in cylindrical vessel.Solution 72
Height of the conical vessel h = 24 cm
Radius of the conical vessel r =5 cm
Let h be the height of the cylindrical vessel which is filled by water of the conical vessel.
Radius of the cylindrical vessel =10 cm
Volume of the cylindrical vessel = volume of water
π(10)2h=150π
h = 150π¸ 100π
h = 1.5 cm
Thus, the height of the cylindrical vessel is 1.5 cm.
Chapter 16 – Surface Areas and Volumes Exercise Ex. 16.2
Question 1
Solution 1
Question 2
Solution 2
Question 3
Solution 3
Question 4
Solution 4
Question 5
Solution 5
Question 6
Solution 6
Question 7
A cylindrical tub of radius 5 cm and length 9.8 cm is full of water. A solid in the form of a right circular cone mounted on a hemisphere is immersed in the tub. If the radius of the hemi-sphere is 3.5 cm and height of the cone outside the hemisphere is 5 cm, find the volume of the water left in the tub. (Take = 22/7)Solution 7
Question 8
Solution 8
Question 9
Solution 9
Question 10
Solution 10
Question 11
Solution 11
Question 12
Solution 12
Question 13
Solution 13
Question 14
Solution 14
Question 15
Solution 15
Question 16
A cylinderical road roller made of iron is 1 m long. Its internal diameter is 54 cm and the thickness of the iron sheet used in making the roller is 9 cm. Find the mass of the roller, if 1 cm3 of iron has 7.8 gm mass. (Use = 3.14)Solution 16
Question 17
A vessel in the form of a hollow hemisphere mounted by a hollow cylinder. The dijameter of the hemisphere is 14 cm and the total height of the vessel is 13 cm. Find the inner surface area of the vessel.Solution 17
Question 18
Solution 18
Question 19
Solution 19
Question 20
A right circular cylinder having diameter 12 cm and height 15 cm is full of ice-cream. The ice-cream is to be filled in cones of height 12 cm and diameter 6 cm having a hemispherical shape on the top. Find the number of such cones which can be filled with ice-cream.Solution 20
Question 21
Solution 21
Question 22
Solution 22
Question 23
Solution 23
Question 24
Solution 24
Question 25
Solution 25
Question 26
Solution 26
Question 27
Solution 27
Question 28
A wooden toy is made by scooping out a hemisphere of same radius from each end of a solid cylinder. If the height of the cylinder is 10 cm, and its base is of radius 3.5 cm, find the volume of wood in the toy.
(π = 22/7)Solution 28
Question 29
The largest possible sphere is carved out of a wooden solid cube of side 7 cm. find the volume of wood left.(Use = 22/7)Solution 29
Question 30
From a solid cylinder of height 2.8 cm and diameter 4.2 cm, a conical cavity of the same height and same diameter is hollowed out. Find the total surface area of the remaining solid. (π = 22/7)Solution 30
Question 31
The largest cone is curved out from one face of solid cube of side 21 cm. Find the volume of the remaining solid.Solution 31
Question 32
A solid wooden toy is in the form of a hemisphere surmounted by a cone of same radius. The radius of hemisphere is 3.5 cm and the total wood used in the making of toy is 166. Find the height of the toy. Also, find the cost of painting the 6 hemispherical part of the toy at the rate of Rs. 10 per cm2. (Take π = 22/7).Solution 32
Question 33
In Fig. 16.57, from a cuboidal solid metalic block, of dimensions 15 cm × 10 cm × 5 cm, a cylindrical hole of diameter 7 cm is drilled out. Find the surface area of the remaining block. (Take π = 22/7).
Solution 33
Question 34
A building is in the form of a cylinder surmounted by a hemi-spherical vaulted done and contains of air. If the internal diameter of done is equal to its total height above the floor, find the height of the building?Solution 34
Question 35
A pen stand made of wood is in the shape of a cuboid four conical depressions and a cubical depression to hold the pens and pins, respectively. The dimension of the cuboid are 10 cm × 5 cm × 4 cm. The radius of each of the conical depression is 0.5 cm and the depth is 2.1 cm. The edge of the cubical depression is 3 cm. Find the volume of the wood in the entire stand.Solution 35
Question 36
A building is in the form of a cylinder surmounted by a hemispherical dome. The base diameter of the dome is equal to of the total height of the building. Find the height of the building, if it contains of air.Solution 36
Question 37
A solid toy is in the form of a hemisphere surmounted by a right circular cone. The height of cone is 4 cm and the diameter of the base is 8 cm. Determine the volume of the toy. If a cube circumscribes the toy, then find the difference of the volumes of cube and the toy. Also, find the total surface area of the toy.Solution 37
Question 38
A circus tent is in the shape of a cylinder surmounted by a conical top of same diameter. If their common diameter is 56m, the height of the cylindrical part is 6 m and the total height of the tent above the ground is 27 m, find the area of the canvas used in making the tent.Solution 38
Total area of the canvas = curved surface area of the cone + curved surface area of a cylinder radius = 28 m height (cylinder) = 6 m
height (cone) = 21 m
l = slant height of cone
curved surface area of the cone = πrl
=π×28×35
=×28×35 = 3080 m2
curved surface area of the cylinder = 2πrh
=2××28×6
=1056
Total area of the canvas = 3080+1056 =4136 m2
Chapter 16 – Surface Areas and Volumes Exercise Ex. 16.3
Question 1
Solution 1
Question 2
Solution 2
Question 3
Solution 3
Question 4
Solution 4
Question 5
Solution 5
Question 6
Solution 6
Question 7
Solution 7
Question 8
Solution 8
Question 9
Solution 9
Question 10
A milk container of height 16 cm is made of metal sheet in the form of frustum of a cone with radii of its lower and upper ends as 8 cm and 20 cm respectively. Find the cost of milk at the rate of Rs.44 per litre which the container can hold.Solution 10
Question 11
A bucket is in the form of a frustum of a cone of height 30 cm with radii of its lower and upper ends as 10 cm and 20 cm respectively. Find the capacity and surface area of the bucket. Also, find the cost of milk which can completely fill the container, at the rate of Rs.25 per litre.Solution 11
Question 12
Solution 12
Question 13
Solution 13
Question 14
Solution 14
Question 15
Solution 15
Question 16
Solution 16
Question 17
Solution 17
Question 18
A solid cone of base radius 10 cm is cut into two parts through the mid-points of its height, by a plane parallel to its base. Find the ratio in the volumes of two parts of the cone.Solution 18
Question 19
A bucket open at the top, and made up of a metal sheet is in the form of a frustum of a cone. The depth of the bucket is 24 cm and the diameters of its upper and lower circular ends are 30 cm and 10 cm respectively. Find the cost of metal sheet used in it at the rate of Rs. 10 per 100 cm2. (π = 22/7)Solution 19
Question 20
In Fig. 14.75, from the top of a solid cone of height 12 cm and base radius 6 cm, a cone of height 4 cm is removed by a plane parallel to the base. Find the total surface area of the remaining solid.
).
Solution 20
Question 21
The height of a cone is 10 cm. The cone is divided into two parts using a plane parallel to its base at the middle of its height. Find the ratio of the volumes of two parts.Solution 21
Let the height of the cone be H and the radius be R. This cone is divided into two equal parts.
AQ=1/2 AP
Also,
QP||PC
Therefore,ΔAQD~ΔAPC.
So,
Question 22
A bucket, made of metal sheet, is in the form of a cone whose height is 35 cm and radii of circular ends are 30 cm and 12 cm. How many liters of milk it contains if it is full to the brim? If the milk is sold at 40 per litre, find the amount received by the person.Solution 22
A bucket, made of metal sheet, is in the form of a cone.
R = 15 cm, r = 6 cm and H=35 cm
Now, using the similarity concept, we can writ
Volume of the frustum is
The rate of milk is Rs. 40 per litre.
So, the cost of 51.48 litres is Rs. 2059.20.Question 23
The diameters of the lower and upper ends of a bucket in the form of a frustum of a cone are 10 cm and 30 cm respectively. If its height is 24 cm,
(i) Find the area of the metal sheet used to make the bucket.
(ii) Why we should avoid the bucket made by ordinary plastic? (use π = 3.14)Solution 23
(i)
Given:
Radius of lower end (r1) = Diameter/2 = 5 cm
Radius of upper end (r2) = Diameter/2 = 15 cm
Height of the bucket (h) = 24 cm
Area of metal sheet used in making the bucket
= CSA of bucket + Area of smaller circular base
Hence, area of the metal sheet used in making the bucket is 1711.3 cm2.
(ii)
We should avoid the bucket made by ordinary plastic because it is less strength than metal bucket and also not ecofriendly.
Discover more from EduGrown School
Subscribe to get the latest posts sent to your email.