We have solved every question stepwise so you don’t have to face difficulty in understanding the solutions. It will also give you concepts that are important for overall development of students. Class 9 Ch 12 Sound Written Solutions & Video Solution will be useful in higher classes as well because variety of questions related to these concepts can be asked so you must study and understand them properly
Table of Contents
NCERT Solutions for Class 9 Ch 12 Sound Science
In Text Questions
Page No: 162
1. How does the sound produced by a vibrating object in a medium reach your ear?
When an object vibrates, it sets the particles of the medium around it vibrating. The particles in the medium in contact with the vibrating object displace from its equilibrium position. It then exerts force on the adjacent particles. After displacing the adjacent particle the first particle of medium comes back in its original position. This process continues in the medium till the sound reaches your ear.
Page No: 163
1. Explain how sound is produced by your school bell.
Answer
When the bell continues to move forward and backward, it creates a series of compressions and rarefactions making production of sound.
2. Why are sound waves called mechanical waves?
Answer
Sound waves needs material medium to propagate therefore, they are called mechnical waves. Sound waves propagate through a medium because of theinteraction of the particles present in that medium.
3. Suppose you and your friend are on the moon. Will you be able to hear any sound produced by your friend?
Answer
No, because sound waves needs a medium through which they can propagate. Since there is no material medium on the moon due to absence of atmosphere, you cannot hear any sound on the moon.
Page No: 166
1. Which wave property determines (a) loudness, (b) pitch?
Answer
(a) Amplitude
2. Guess which sound has a higher pitch: guitar or car horn?
Answer
Guitar has a higher pitch than car horn, because sound produced by the strings of guitar has high frequency than that of car horn. High the frequency higher is the pitch.
Answer
→ Wavelength: The distance between two consecutive compressions or two consecutive rarefactions is known as the wavelength. Its SI unit is metre (m).
→ Frequency: The number of complete oscillations per second is known as the frequency of a sound wave. It is measured in hertz (Hz).
→ Amplitude: The maximum height reached by the crest or trough of a sound wave is called its amplitude.
2. How are the wavelength and frequency of a sound wave related to its speed?
Answer
Speed, wavelength, and frequency of a sound wave are related by the following equation:
Speed (v) = Wavelength (λ) x Frequency (ν)
v = λ x ν
3. Calculate the wavelength of a sound wave whose frequency is 220 Hz and speed is 440 m/s in a given medium.
Answer
Frequency of the sound wave, ν= 220 Hz
Speed of the sound wave, v = 440 m s-1
For a sound wave,
Speed = Wavelength x Frequencyv = λ x ν
∴ λ= v / ν = 440 / 220 = 2m
Hence, the wavelength of the sound wave is 2 m.
4. A person is listening to a tone of 500 Hz sitting at a distance of 450 m from the source of the sound. What is the time interval between successive compressions from the source?
Answer
The time interval between two successive compressions is equal to the time period of the wave. This time period is reciprocal of the frequency of the wave and is given by the relation:T= 1 / Frequency = 1/ 500 = 0.002 s
1. Distinguish between loudness and intensity of sound.
Answer
Intensity of a sound wave is defined as the amount of sound energy passing through a unit area per second. Loudness is a measure of the response of the ear to the sound. The loudness of a sound is defined by its amplitude. The amplitude of a sound decides its intensity, which in turn is perceived by the ear as loudness.
Page No: 167
1. In which of the three media, air, water or iron, does sound travel the fastest at a particular temperature?
Answer
The speed of sound depends on the nature of the medium. Sound travels the fastest in solids. Its speed decreases in liquids and it is the slowest in gases. Therefore, for a given temperature, sound travels fastest in iron.
Page No: 168
1. An echo returned in 3 s. What is the distance of the reflecting surface from the source, given that the speed of sound is 342 m s−1?
Answer
Speed of sound, v = 342 m s−1
Echo returns in time, t = 3 s
Distance travelled by sound = v × t = 342 × 3 = 1026 m
In the given time interval, sound has to travel a distance that is twice the distance of the reflecting surface and the source.
Hence, the distance of the reflecting surface from the source= 1026 / 2 m = 513 m.
Page No: 169
1. Why are the ceilings of concert halls curved?
Answer
Ceilings of concert halls are curved so that sound after reflection (from the walls) spreads uniformly in all directions.
Page No: 170
1. What is the audible range of the average human ear?
Answer
The audible range of an average human ear lies between 20 Hz to 20,000 Hz.
2. What is the range of frequencies associated with
(a) Infrasound?
(b) Ultrasound?
Answer
(a) Infrasound has frequencies less than 20 Hz.
(b) Ultrasound has frequencies more than 20,000 Hz.
Page No: 172
1. A submarine emits a sonar pulse, which returns from an underwater cliff in 1.02 s. If the speed of sound in salt water is 1531 m/s, how far away is the cliff?
Time taken by the sonar pulse to return, t = 1.02 s
Speed of sound in salt water, v = 1531 m s – 1
Distance of the cliff from the submarine = Speed of sound x Time taken
Distance of the cliff from the submarine = 1.02 x 1531 = 1561.62 m
Actual Distance, d= Distance of the cliff from the submarine/2
= 1561/2
= 780.31 m
Answer
Sound is a form of eneergy which gives the sensation of hearing. It is produced by the vibrations caused in air by vibrating objects.
2. Describe with the help of a diagram, how compressions and rarefactions are produced in air near a source of sound.
Answer
When a vibrating body moves forward, it createsa region of high pressure in its vicinity. This region of high pressure is known as compressions. When it moves backward, it creates a region of low pressure in its vicinity. This region is known as a rarefaction. As the body continues to move forward and backwards, it produces a series of compressions and rarefactions. This is shown in below figure.
Answer
The quality or timber of sound enables us to identify our friend by his voice.
6. Flash and thunder are produced simultaneously. But thunder is heard a few seconds after the flash is seen, why?
Answer
The speed of sound (344 m/s) is less than the speed of light(3 x 108 m/s). Sound of thunder takes more time to reach the Earth as compared to light. Hence, a flash is seen before we hear a thunder.
Answer
For a sound wave,
Speed = Wavelength x Frequencyv = λ x ν
Speed of sound in air = 344 m/s (Given)
(i) For, ν= 20 Hz
λ1= v/ν = 344/20 = 17.2 m
(ii) For, ν= 20000 Hz
λ2= v/ν = 344/20000 = 0.172 m
Hence, for humans, the wavelength range for hearing is 0.0172 m to 17.2 m.
8. Two children are at opposite ends of an aluminium rod. One strikes the end of the rod with a stone. Find the ratio of times taken by the sound wave in air and in aluminium to reach the second child.
Answer
Velocity of sound in air= 346 m/s
Velocity of sound wwave in aluminium= 6420 m/s
Let length of rode be 1
Time taken for sound wave in air, t1= 1 / Velocity in air
Time taken for sound wave in Aluminium, t2= 1 / Velocity in aluminium
Therefore, t1 / t2 = Velocity in aluminium / Velocity in air = 6420 / 346 = 18.55 : 1
9. The frequency of a source of sound is 100 Hz. How many times does it vibrate in a minute?
Answer
Frequency = 100 Hz (given)
This means the source of sound vibrates 100 times in one second.
Therefore, number of vibrations in 1 minute, i.e. in 60 seconds = 100 x 60 = 6000 times.
10. Does sound follow the same laws of reflection as light does? Explain.
Answer
Sound follows the same laws of reflection as light does. The incident sound wave and the reflected sound wave make the same angle with the normal to the surface at the point of incidence. Also, the incident sound wave, the reflected sound wave, and the normal to the point of incidence all lie in the same plane.
11. When a sound is reflected from a distant object, an echo is produced. Let the distance between the reflecting surface and the source of sound production remains the same. Do you hear echo sound on a hotter day?
Answer
An echo is heard when the time for the reflected sound is heard after 0.1 s
Time Taken= Total Distance / Velocity
On a hotter day, the velocity of sound is more. If the time taken by echo is less than 0.1 sec it will not be heard.
12. Give two practical applications of reflection of sound waves.
Answer
Two practical applications of reflection of sound waves are:
→ Reflection of sound is used to measure the distance and speed of underwater objects. This method is known as SONAR.
→ Working of a stethoscope is also based on reflection of sound. In a stethoscope, the sound of the patient’s heartbeat reaches the doctor’s ear by multiple reflection of sound.
13. A stone is dropped from the top of a tower 500 m high into a pond of water at the base of the tower. When is the splash heard at the top? Given, g = 10 m s−2 and speed of sound = 340 m s−1.
Answer
Height of the tower, s = 500 m
Velocity of sound, v = 340 m s−1
Acceleration due to gravity, g = 10 m s−2
Initial velocity of the stone, u = 0 (since the stone is initially at rest)
Time taken by the stone to fall to the base of the tower, t1
According to the second equation of motion:
Now, time taken by the sound to reach the top from the base of the tower, t2= 500 / 340 = 1.47 s
Therefore, the splash is heard at the top after time, t
Where, t= t1 + t2 = 10 + 1.47 = 11.47 s.
14. A sound wave travels at a speed of 339 m s−1. If its wavelength is 1.5 cm, what is the frequency of the wave? Will it be audible?
Answer
Speed of sound, v= 339 m s – 1
Wavelength of sound, λ= 1.5 cm = 0.015 m
Speed of sound = Wavelength x Frequencyv= λ x v
∴ v= v / λ = 339 / 0.015 = 22600 Hz
The frequency range of audible sound for humans lies between 20 Hz to 20,000 Hz. Since the frequency of the given sound is more than 20,000 Hz, it is not audible.
15. What is reverberation? How can it be reduced?
Answer
The repeated multiple reflections of sound in any big enclosed space is known as reverberation.
The reverberation can be reduced by covering the ceiling and walls of the enclosed space with sound absorbing materials, such as fibre board, loose woollens, etc.
16. What is loudness of sound? What factors does it depend on?
Answer
The effect produced in the brain by the sound of different frequencies is called loudness of sound.
Loudness depends on the amplitude of vibrations. In fact, loudness is proportional to the square of the amplitude of vibrations.
17. Explain how bats use ultrasound to catch a prey.
Answer
Bats produce high-pitched ultrasonic squeaks. These high-pitched squeaks are reflected by objects such as preys and returned to the bat’s ear. This allows a bat to know the distance of his prey.
18. How is ultrasound used for cleaning?
Answer
Objects to be cleansed are put in a cleaning solution and ultrasonic sound waves are passed through that solution. The high frequency of these ultrasound waves detaches the dirt from the objects.
19. Explain the working and application of a sonar.
Answer
SONAR is an acronym for Sound Navigation And Ranging. It is an acoustic device used to measure the depth, direction, and speed of under-water objects such as submarines and ship wrecks with the help of ultrasounds. It is also used to measure the depth of seas and oceans.
20. A sonar device on a submarine sends out a signal and receives an echo 5 s later. Calculate the speed of sound in water if the distance of the object from the submarine is 3625 m.
Answer
Time taken to hear the echo, t= 5 s
Distance of the object from the submarine, d= 3625 m
Total distance travelled by the sonar waves during the transmission and reception in water= 2d
21. Explain how defects in a metal block can be detected using ultrasound.
Answer
Defects in metal blocks do not allow ultrasound to pass through them and they are reflected back. This fact is used to detect defects in metal blocks. Ultrasound is passed through one end of a metal block and detectors are placed on the other end. The defective part of the metal block does not allow ultrasound to pass through it. As a result, it will not be detected by the detector. Hence, defects in metal blocks can be detected using ultrasound.
Important Link
Quick Revision Notes- Ch 12 Sound
Most Important Questions- Ch 12 Sound
Important MCQs- Ch 12 Sound
For Free Video Lectures, Click Here
Discover more from EduGrown School
Subscribe to get the latest posts sent to your email.