NCERT Solutions for Class 11 Biology Chapter – 11 Transport in Plants includes all the important topics with detailed explanation that aims to help students to understand the concepts better. Students who are preparing for their Class 11 Biology exams must go through NCERT Solutions for Class 11 Chapter -11 Transport in Plants . NCERT Solutions will make you understand the topics in most simple manner and grasp it easily to perform better.
Exercises
Page No: 193
1. What are the factors affecting the rate of diffusion?
Page No: 193
1. What are the factors affecting the rate of diffusion?
Answer
Factors affecting the rate of diffusion are:
→ Gradient of concentration
→ Permeability of the membrane separating them
→ Temperature and pressure
Answer
Porins are proteins that form huge pores in the outer membranes of the plastids, mitochondria and some bacteria allowing molecules up to the size of small proteins to pass through. They help in facilitating the passive transport of small-sized protein molecules.
Answer
Proteins pumps are made up of specific proteins called trans-membrane proteins which use energy to carry substances across the cell membrane. These pumps can transport substances from a low concentration to a high concentration. The rate of transport reaches the maximum when all the protein transporters are being used or are saturated.
Answer
Water molecules possess kinetic energy. In liquid and gaseous form, they are in random motion that is both rapid and constant. The greater the concentration of water in a system, the greater is its kinetic energy or water potential. Pure water has the highest concentration of water molecules. Therefore, it has the highest water potential. When some solute is dissolved in water, the water potential of pure water decreases.
(a) Diffusion and Osmosis
(b) Transpiration and Evaporation
(c) Osmotic Pressure and Osmotic Potential
(d) Imbibition and Diffusion
(e) Apoplast and Symplast pathways of movement of water in plants.
(f) Guttation and Transpiration.
(b) Transpiration and Evaporation
(c) Osmotic Pressure and Osmotic Potential
(d) Imbibition and Diffusion
(e) Apoplast and Symplast pathways of movement of water in plants.
(f) Guttation and Transpiration.
Answer
(a) Diffusion and Osmosis
(b) Transpiration and Evaporation
(c) Osmotic Pressure and Osmotic Potential
(d) Imbibition and Diffusion
(e) Apoplast and Symplast pathways of movement of water in plants.
(f) Guttation and Transpiration.
6. Briefly describe water potential. What are the factors affecting it?
| Diffusion | Osmosis |
| It is a movement of molecules from high concentration to low concentration. | It is a movement of molecules from high concentration to low concentration through semi permeable membrane. |
| It can occur in solids, liquids, and gases. | It occurs in the liquid medium. |
| It does not require any driving Force. | It occurs in response to a driving force. |
(b) Transpiration and Evaporation
| Transpiration | Evaporation |
| It occurs in plants. | It occurs from any free surface and involves living and non-living surfaces. |
| It occurs mainly through the stomatal pores on plant leaves. | It occurs through any free surface. |
| It is controlled by environmental factors as well as physiological factors of plants | It is entirely driven by environmental factors. |
(c) Osmotic Pressure and Osmotic Potential
| Osmotic Pressure | Osmotic Potential |
| It is expressed in bars with a positive sign. | It is expressed in bars with a negative sign. |
| It is a positive pressure. | It is a negative pressure. |
| Its value increases with an increase in the concentration of solute particles. | Its value decreases with an increase in the concentration of solute particles. |
(d) Imbibition and Diffusion
| Imbibition | Diffusion |
| Imbibition is a special type of diffusion when water is absorbed by solids and colloids causing them to enormously increase in volume. | Diffusion is the passive movement of particles, ions, and molecules along the concentration gradient. |
| It usually involves water. | It involves solids, liquids, and gases. |
(e) Apoplast and Symplast pathways of movement of water in plants.
| Apoplast pathways | Symplast pathways |
| It is the system of adjacent cell walls that is continuous throughout the plant, except at the casparian strips of the endodermis in the roots | It is the system of interconnected protoplasts. |
| Water moves through the intercellular spaces and the walls of cells | Water travels through the cytoplasm of cells and intercellular movement is through plasmodesmata. |
| It is a faster process of water movement and water moves through mass flow. | It is a slower process of water movement. |
(f) Guttation and Transpiration.
| Guttation | Transpiration |
| It occurs through the vein endings of leaves. | It occurs through the stomata. |
| Water is lost from the leaves in the form of liquid droplets. | Water is lost from the leaves in the form of water vapour. |
| It occurs usually at night. | It occurs usually during the day. |
| It is regulated by humidity, temperature and presence of water in soil. | It is regulated by a number of external and internal factors such as relative humidity, temperature opening and closing of stomata, etc. |
6. Briefly describe water potential. What are the factors affecting it?
Answer
Water potential is the potential energy of water to move from one part to the other during various cellular processes such as diffusion, osmosis, etc. It is denoted by the Greek letter Psi or Ψ and is expressed in Pascals (Pa). A system with higher concentration of water has a higher kinetic energy or water potential. Pure water has the highest water potential while Solutions have lower water potential than it.
Answer
If a pressure greater than atmospheric pressure is applied to pure water or a solution than its ater potential increases because of pressure potential which develops due to increased pressure. It is equivalent to pumping water from one place to another.8. (a) With the help of well-labelled diagrams, describe the process of plasmolysis in plants, giving appropriate examples.
(b) Explain what will happen to a plant cell if it is kept in a solution having higher water potential.
Answer
(a) Plasmolysis occurs when water moves out of the cell and the cell membrane of a plant cell shrinks away from its cell wall. This happens when the plant cell is placed in a hypertonic solution (a solution having more solute concentration than the cell cytoplasm). This causes the water to move out of the cell and toward the solution. The cytoplasm of the cell shrinks and the cell is said to be plasmolysed. This process can be observed in an onion peel kept in a highly concentrated salt solution.
(b) A hypotonic solution has higher water potential. When a plant cell is placed in a hypotonic solution or a solution having higher water potential, water diffuses into the cell causing the cytoplasm to build up a pressure against the wall, called turgor pressure. This leads to the cell getting swollen. But the rigidity of the cell wall, prevents the cell from bursting.
9. How is the mycorrhizal association helpful in absorption of water and minerals in plants?
Answer
Mycorrhiza is a symbiotic association of a fungus with a root system. This fungal hyphae either form a dense network around the young roots or they penetrate the cells of the roots. The large surface area of the fungal hyphae is helpful in increasing the absorption of water and minerals from the soil. In return, they get sugar and nitrogenous compounds from the host plants.Answer
Root pressure is the positive pressure which can be responsible for pushing up water to small heights in the stem by the active absorption of nutrients from the soil. However, root pressure does not play a major role in water movement in tall plants. Root pressure contributes towards reestablishment of continuous chains of water molecules in the xylem which often break under enormous tensions created by transpiration pull.Answer
Transpiration creates a suction force inside the xylem. This suction force is called transpiration pull. This is powerful enough to pull the water column from beneath. Adhesion, cohesion and surface tension are the important physical properties of water which further help in the upward movement of water through xylem.Factors that influence transpiration are temperature, light, humidity, wind speed, number and distribution of stomata, number of stomatal aperture with guard cells open, water status of the plant, canopy structure, etc.
• creates transpiration pull for absorption and transport of plants
• supplies water for photosynthesis
• transports minerals from the soil to all parts of the plant
• cools leaf surfaces, sometimes 10 to 15 degrees, by evaporative cooling
• maintains the shape and structure of the plants by keeping cells turgid.
Answer
→ Cohesion – Mutual attraction between water molecules
→ Surface tension – Responsible for the greater attraction between water molecules in liquid phase than in gaseous phase
→ Adhesion – Attraction of water molecules to polar surfaces
→ Surface tension – Responsible for the greater attraction between water molecules in liquid phase than in gaseous phase
→ Adhesion – Attraction of water molecules to polar surfaces
→ Capillarity -Ability of water to rise in thin tubes
These physical properties give water high tensile strength, i.e., an ability to resist a pulling force and high capillarity, i.e., the ability to rise in thin tubes. The thin tubes of xylem work like capillary tubes.
These physical properties give water high tensile strength, i.e., an ability to resist a pulling force and high capillarity, i.e., the ability to rise in thin tubes. The thin tubes of xylem work like capillary tubes.
Answer
In plants, nutrients are absorbed through the active and passive transports. The endodermis of roots have many transport proteins embedded in their plasma membrane. Transport proteins in endodermis cells enable plant cells to adjust the quantity and types of solutes to be absorbed from the soil. It regulates the quantity and type of minerals and ions that reach the xylem tissue of plants.Answer
In phloem, food is transported from source to sink. Leaves are the usual source and storage organs are the usual sink. But the storage organs become source when new buds emerge during early spring. Thus, a reverse flow of food is required. Hence, movement through phloem is bi-directional.
Answer
Answer
The immediate cause of the opening or closing of the Stomata is a change in the turgidity of the guard cells. The inner walls of the guard cells are thick and elastic, while the outer walls are thin. When turgidity increases within the two guard cells flanking each stomatal aperture or pore, the thin outer walls bulge out and force the inner walls into a crescent shape. The stomatal opening is facilitated by the radial arrangement of the microfibrils. At the time of the closing of the stomata, the guard cells lose their turgidity, the outer and inner walls retain their original shapes, and the microfibrils get arranged longitudinally.
Discover more from EduGrown School
Subscribe to get the latest posts sent to your email.