Chapter 8: Communication Open Source Concept | class 12th | revision notes computer science

Communication And open source Network Notes Class 12 Computer Science

Basic communications media types

· Copper

o unshielded twisted pair (utp)

o shielded twisted pair (stp)

o coaxial cable (thinnet, thicknet)

· Fiber optic

o single-mode

o multi-mode

· Infrared

· Radio & microwave

Twisted Pair Cable
· These cables consist of two insulated copper wires twisted around each other in a double helix.

· Twisting of wires reduces crosstalk which is bleeding of a signal from one wire to another.

Types:
· Unshielded Twisted Pair (UTP)

· Shielded Twisted Pair (STP

STP offers greater protection from interference and crosstalk due to shielding.

But it is heavier and costlier than UTP.

USE 1. In local telephone communication

2. For digital data transmission over short distances upto 1 km

Advantages:
· Easy to install and maintain

· Simple

· Inexpensive

· Low weight

· Suitable for small (Local) Networks

Disadvantages:
· Not suitable for long distance due to high attenuation.

· Low bandwidth support.

· Low Speed

Coaxial cable
· Coaxial cable consists of a solid copper wire core surrounded by a plastic cladding shielded in a wire mesh.

· Shield prevents the noise by redirecting it to ground.

Types:
Coaxial cable comes in two sizes which are called thinnet and thicknet.

· Thicknet : segment length upto 500 m

· Thinnet : segment length upto 185 m

USE:
In TV channel communication

Advantages:
· Better than twisted wire cable.

· Popular for TV networks

· Offers higher bandwidth & Speed

· Disadvantages:

· Expensive than twisted wires.

· Not compatible with twisted wire cable.

Optical Fibres
· Thin strands of glass or glass like material designed to carry light from one source to another.

· Source converts (Modulates) the data signal into light using LED (Light Emitting Diodes) or LASER diodes and send it over the Optical fiber.

It consists of three parts:
1. The core: glass or plastic through which the light travels.

2. The cladding : covers the core and reflects light back to the core

3. Protective coating : protects the fiber

Advantages
· Not affected by any kind of noise.

· High transmission capacity

· Speed of Light

· Suitable for broadband communication

Disadvantages
· Installation requires care.

· Connecting two Optical fibers is difficult.

· Optical fibers are more difficult to solder

· Most expensive

Microwaves
Microwaves are transmitted from the transmitters placed at very high towers to the receivers at a long distance.

Advantages
• Maintenance easy than cables.

• Suitable when cable can not be used.

Disadvantages
• Repeaters are required for long distance communication.

• Less Bandwidth available

Satellite
Geostationary satellites are placed around 36000 KM away from the earth’s surface. In satellite communication transmitting station transmits the signals to the satellite. (It is called up-linking). After receiving the signals (microwaves) it amplifies them and transmit back to earth in whole visibility area.

Receiving stations at different places can receive these signals. (It is called down-linking).

Advantage

• Area coverage is too large

Disadvantage

• High investment

Network devices

Modem

· A modem is a computer peripheral that allows you to connect and communicate with other computers via telephone lines.
· Modem means Modulation/ Demodulation.
· Modulation: A modem changes the digital data from your computer into analog data, a format that can be carried by telephone lines.

· Demodulation: The modem receiving the call then changes the analog signal back into digital data that the computer can digest.

· The shift of digital data into analog data and back again, allows two computers to speak with one another.

RJ- 45 Connector

RJ-45 is short for Registered Jack-45. It is an eight wire connector which is commonly used to connect computers on the local area networks i.e., LAN.

Network Interface Cards (Ethernet Card)

· A network card, network adapter or NIC (network interface card) is a piece of computer hardware designed to allow computers to communicate over a computer network. It provides physical access to a networking medium and often provides a low-level addressing system through the use of MAC addresses. It allows users to connect to each other either by using cables or wirelessly.

A repeater is an electronic device that receives a signal and retransmits it at a higher level or higher power, or onto the other side of an obstruction, so that the signal can cover longer distances without degradation. In most twisted pair Ethernet configurations, repeaters are required for cable runs longer than 100 meters.